PAPER
2.国際会議等論文
--------------------------------------------------------------------------------
1. Mathematical Model of LD Converter and Its Application to Theoretical
Analysis of Refining Process I.Muchi, M.Miwa : International Iron and Steel
Congress, Sep., 1970, Tokyo, P.347
--------------------------------------------------------------------------------
2. Turburent Mixing in Metallurgical Systems J.Szekely, C.W.Chang : Process
Engineering of Pyrometallurgy, Feb., 1974, London, P.60
--------------------------------------------------------------------------------
3. Mathematical and Physical Modelling of Mixing in Argon Stirred Ladles J.Szekely,
C.W.Chang : International Iron and Steel Congress, 1974, Desseldolf,
--------------------------------------------------------------------------------
4. Unified Modelling of Various Steelmaking Processes I.Muchi : Mathematical
Process Models in Iron- and Steelmaking, Feb., 1975, Amsterdam, P.134
--------------------------------------------------------------------------------
5. Simultaneous Heat, Mass and Momentum Transfer in Mushy Zone of Ingot I.Muchi
: Japan-U.S. Joint Seminar on Solodification of Metals and Alloys, Jan., 1977,
Tokyo, P.57
--------------------------------------------------------------------------------
6. Theoretical Analysis and Model Experiments on Electromagnetic Stirring in
Continuous Casting I.Muchi : The 4th Japan-Germany Seminar, Nov., 1980, Tokyo,
P.142
--------------------------------------------------------------------------------
7. Mixing Time of Refining Vessels Stirred by Gas Injection T.Okamoto, I.Muchi
: The 3rd Japan-Sweden Symposium on Process Metallurgy Science and Technology
of Steel-making Processes May, 1981, Stockholm, P.1
--------------------------------------------------------------------------------
8. Effect of Electric and Magnetic Currents on Solodification Processes K.Miyazawa,
T.Fukaya, I.Muchi : IUTAM Symposium on Metallurgical Application of Magnetohydrodynamics,
Sep., 1982, Cambridge, England, P.224
--------------------------------------------------------------------------------
9. Mass Transfer Rate in Ladle Refining Processes M.Kawachi, I.Muchi : SCANINJECTV
Int'l Conf. on Refining of Iron and Steel by Powder Injection, June, 1983,
Lulea, Sweden, P.12
--------------------------------------------------------------------------------
10. Fluid Flow and Mass Transfer in Gas Stirred Ladles M.Kawachi, I.Muchi :
An International Symposium on Foundry Processes : Their Chemistry and Physics,
Sep., 1986, Warren, U.S.A.
--------------------------------------------------------------------------------
11. Recent Activities on Electromagnetic Metallurgy in Japan The 4th Japan-Nordic
Countries Joint Symposium on Science and Technology of Process Metallurgy,
Nov., 1986, Tokyo, P.148
--------------------------------------------------------------------------------
12. Horizontal Electromagnetic Casting Process and Its Stability Analysis T.Kozuka
: Proceeding of Modelling of Casting and Welding Processes, Palm Coast, FL,
U.S.A., April, 1988
--------------------------------------------------------------------------------
13. Metallurgical Aspects of Electromagnetic Processing of Materials IUTAM
Symposium on Liquid Metal MHD, May, 1988, Riga, USSR
--------------------------------------------------------------------------------
14. Electromagnetic Edge Shape Control of Metal Sheet T.Yuhara, T.Kozuka, I.Muchi
: An International Symposium on Casting of Near Net Shape Products,Nov., 1988,
Honolulu, U.S.A., p.583
--------------------------------------------------------------------------------
15. Recent Studies on Electromagnetic Processing of Materials The International
Symposium on Metallurgical Processes for the Year 2000 and Beyond, Feb., 1989,
Las Vegas, U.S.A., p.17
--------------------------------------------------------------------------------
16. Application of Electromagnetic Force to Solidification Processing T.Satsuta
: Japan-U.S. Cooperative Science Program Seminar on Solidification Processing
of Advanced Materials, May, 1989, Oiso, Japan, p.75
--------------------------------------------------------------------------------
17. Electromagnetic Processing of Materials New Materials '90 Japan, Osaka,
Japan, Oct.,1990, p.387
--------------------------------------------------------------------------------
18. The Influences of Design Parameters on Electromagnetic Field Around on
Induction Cold Crucible K.Kuwabara, K.Sassa : 1st European East-West Symp.
on Materials and Processes-Met Tech '90, Helsinki, Finland, June 10-18, 1990
--------------------------------------------------------------------------------
19. Electromagnetic Atomization of Molten Metal K.Sassa, S.Ninagawa, T.Kozuka
: 1st European East-West Symp. on Materials and Processes-Met Tech '90, Helsinki,
Finland, June 10-18, 1990
--------------------------------------------------------------------------------
20. Recent Activities and Trend of Electromagnetic Processing of Materials
The 6th Int. Iron and Steel Congress, Nagoya, Japan,Oct.,1990, 4,p.370
--------------------------------------------------------------------------------
21. Theoretical Analysis of Electromagnetic Field of Induction Cold Crucible
Taking Assount of Azimuthal Distribution M.Kuwabara, H.Nakata, K.Sassa : The
6th Int. Iron and Steel Congress, Nagoya, Japan,Oct.,1990, 4,p.246
--------------------------------------------------------------------------------
22. Atomization of Solid Metal by Use of Electromagnetic Force K.Sassa, S.Ninagawa
: The 6th Int. Iron and Steel Congress, Nagoya, Japan,Oct.,1990, 4,p.416
--------------------------------------------------------------------------------
23. Shape Control of Molten Metal Puddle in Twin Roll Processes M.Kawachi,
T.Kozuka : The 6th Int. Iron and Steel Congress, Nagoya, Japan,Oct.,1990, 4,p.454
--------------------------------------------------------------------------------
24. The Theoretical Analysis of a Cold Crucible K.Iwai, K.Sassa, M.Kuwabara
: International Conference on Computer Applications to Materials Science and
Engineering, 1990,Tokyo, Japan, P.525
--------------------------------------------------------------------------------
25. Recent Progress of Electromagnetic Processing of Materials Electromagnetic
Force and Applications Proceeding of the Third International ISEM Symp. Sendai,
Japan, Jan.,1991 [Elsevier Science Pub.]
--------------------------------------------------------------------------------
26. Theoretical Analysis of the Magnetic Field of a Cold Crucible K.Iwai, K.Sassa
: Electromagnetic Force and Applications Proceeding of the Third International
ISEM Symp. Sendai, Japan, Jan.,1991, P.263 [Elsevier Science Pub.]
--------------------------------------------------------------------------------
27. A Hybrid Process of a Cold Crucible with a Plasma Heating K.Iwai, R.Tamaoki,
K.Sassa : Int. Conf. on Energy Transfer in MagnetoHydroDynamics Flows, Oct.,
1991, Cadarache, France, P.201
--------------------------------------------------------------------------------
28. Recent Activities of Electromagnetic Processing of Materials 1st Pacific
Rim International Conf. on Advanced Materials and Processing Hangzhou, China,
June 1992
--------------------------------------------------------------------------------
29. Application of Induction Heating to Melting of Glass for Vitrification
of Radioactive T.Takasu : Int. Conf. on MHD Process to Protection of Environment,
Ukraine, 1992
--------------------------------------------------------------------------------
30. Recent Activities on Electromagnetic Processing of Materials in Japan The
Seventh Int. Beer Sheva Seminar on MHD Flows and Turbulence, Jerusalem, Israel,
Feb. 1993
--------------------------------------------------------------------------------
31. The Theoretical and Experimental Studies for Design of a Cold Crucible
K.Sassa, K.Iwai : First International Conference on Processing Materials for
Properties, Hawaii, U.S.A., Nov. 1993
--------------------------------------------------------------------------------
32. Development of Technological Education and Its Environment in Japan III
Seminario Mexico-Japan '94, Jan. 1994
--------------------------------------------------------------------------------
33. Control of Initial solidification in Continuous Casting by Imposing a High
Frequency Magnetic Field from the Outside of a Mold T.Li, K.Sassa : U.S.-Japan
Cooperative Science Program Seminar on "Solidification Processing for
The 21st Century", July 1994, PP.213-224
--------------------------------------------------------------------------------
34. Elimination of Non-Metallic Inclusion in Metal Using Electromagnetic Force
Metallurgical Processes for the Early Twenty-First Century, edited by H.Y.Sohn[TMS],Sep.
1994, Vol.1, PP.221-230
--------------------------------------------------------------------------------
35. Electrodeposition from Molten Salt Bath under Direct Magnetic Field Y.Tanaka,
M.Tsutsui : Second International Conference on Energy Transfer in Magnetohydrodynamics
Flows, Aussois, France, 1994[Pamir], PP.127-134
--------------------------------------------------------------------------------
36. Dynamic Meniscus Behavior in Continuous Casting Mold with Intermittent
High Frequency Magnetic Field and Surface Quality of Products T.Li, K.Sassa
: International Symposium on Electromagnetic Processing of Materials, October
1994, Nagoya, Japan,[ISIJ],PP.242-247
--------------------------------------------------------------------------------
37. Damping Behavior of Surface Wave Motion on Molten Metal by Imposing a High
Frequency Magnetic Field K.Iwai, M.Suda : International Symposium on Electromagnetic
Processing of Materials, October 1994, Nagoya, Japan,[ISIJ],PP.127-131
--------------------------------------------------------------------------------
38. Elimination of Tramp Elements in Molten Metal Using Electromagnetic Force
J.P.Park, Y.Tanaka, K.Sassa : International Symposium on Electromagnetic Processing
of Materials, October 1994, Nagoya, Japan,[ISIJ],PP.497-502
--------------------------------------------------------------------------------
39. Improvement of Surface Quality of Contimuously Cast Metals by Imposing
Intermittent High Frequency Magnetic Field from Outside of a Mold T.Li, K.Sassa
: The Second Pacific Rim Int. Conf. on Advanced Materials and Processing, June
1995, Kyongji, Korea
--------------------------------------------------------------------------------
40. Position Control of Primary silicon in Hypereutectic Al-Si Alloys Using
Electromagnetic Force J.P.Park, K.Sassa : The Second Pacific Rim Int. Conf.
on Advanced Materials and Processing, June 1995, Kyongji, Korea
--------------------------------------------------------------------------------
41. Elimination of Inclusion from Molten Metal Using Traveling Magnetic Field
Y.Tanaka, K.Sassa, K.Iwai and S.Asai : Japan-US Joint Seminar, April 25-27,
1996, Futtsu, Chiba, Japan, PP.71-76
--------------------------------------------------------------------------------
42. Improvement of Surface Quality of Continuously Cast Metal by Imposing an
Intermittent High Frequency Magnetic Field from the Outside of a Mold T.Li,
K.Sassa and S.Asai : The First International Congress on Science and Technology
of Steelmaking, April 22-24, 1996, Chiba, Japan, P.99
--------------------------------------------------------------------------------
43. Recent Activities of EPM in Japan Y.Tanaka, M.Tsutsui and S.Asai : French-Japan
Seminer on Electromagnetic Processing of Materials, 1997, Grnoble, France
--------------------------------------------------------------------------------
44. Elimination of Inclusion from Molten Metal Using Traveling Magnetic Field
Y.Tanaka, K.Sassa, K.Iwai and S.Asai : French-Japan Seminer on Electromagnetic
Processing of Materials, 1997, Grnoble, France
--------------------------------------------------------------------------------
45. Recent Activities on Electromagnetic Processing of Materials S.Asai : 12th
Int. Cong. on Magnetohydrodynamics Electrical Power Generation, 1997, Yokohama,
Japan
--------------------------------------------------------------------------------
46. Electromagnetic Processing of Materials - The State of the Field and Its
Prospects of International Development S.Asai : International Congress on Electromagnetic
Processing of Materials, May, 1997,Paris,France, Vol.1,PP.5-12
--------------------------------------------------------------------------------
47. Separation of Inclusions in Liquid Metal Using Fixed Alternating Magnetic
Field K.Sassa, F.Yamao, K.Iwai and S.Asai : International Congress on Electromagnetic
Processingof Materials, May, 1997,Paris, France, Vol.1,PP.157-163
--------------------------------------------------------------------------------
48. Measurement of High Frequency Pressure Oscillation in Molten Metal Induced
by Electromagnetic Field K.Iwai, S.Amano and S.Asai : International Congress
on Electromagnetic Processing of Materials, May, 1997, Paris, France, Vol.1,
PP.619-623
--------------------------------------------------------------------------------
49. Surface Wave of a Molten Metal Excited by an Intermittent High Frequency
Magnetic Field Y.Chino, Y.Toyama, K.Iwai and S.Asai : International Congress
on Electromagnetic Processing of Materials, May, 1997,Paris,France, Vol.2,
PP.139-144
--------------------------------------------------------------------------------
50. Control of Precipitation Phase Alignment by Imposition of a High Magnetic
Field H.Morikawa, K.Sassa and S.Asai : The Third Pacific Rim International
Conference on Advanced Materials and Processing,Vol.1, Honolulu,Hawaii,USA,
July 12-16,1998,PP.1087-1092
--------------------------------------------------------------------------------
51. Recent Activities on Electromagnetic Processing of Materials in Japan S.Asai
: Japan-France Cooperative Science Program Seminar on New Aspects of EPM, April,1999,Nikko,Japan,
pp.1-4
--------------------------------------------------------------------------------
52. Increase in the Intensity of a Compression Wave in a Liquid Metal K.Iwai,
Q.Wang, T.Momiyama, H.Muraki and S.Asai : id., pp.61-64
--------------------------------------------------------------------------------
53. Crystal Orientation in Various Processes by Imposition of a High Magnetic
Field S.Asai, K.Sassa, M.Ito, M.Tahasi, T.Taniguti, T.Yamada : International
Symposium on New Magneto-science '99, Nov.1999, Omiya, Japan
--------------------------------------------------------------------------------
54. Control of Free Surface Shape on a Molten Metal by Synchronous Imposition
of a Mechanical Oscillation and Intermittent Alternating Magnetic Field Y.Chino,
K.Iwai, S.Asai : The 3rd Int. Symp. on Electromagnetic Processing of Materials,
April, 2000, Nagoya, Japan, pp.49-54
--------------------------------------------------------------------------------
55. Generation of Compression Waves in a Liquid Metal by the Simultaneous Imposition
of DC and AC Magnetic Fields K.Iwai, Q.Wang, T.Momiyama, S.Asai : id, pp.61-66
--------------------------------------------------------------------------------
56. Crystal Orientation in Electrodeposition, Vapordeposition and Solid Reaction
Process by Imposition of a High Magnetic Field S.Asai, K.Sassa, M.Ito, M.Tahashi,
T.Taniguchi, T.Yamada : id, pp.624-629
--------------------------------------------------------------------------------
57. Magnetic Separation of Inclusions in a Molten Metal by Using a High Magnetic
Field K.Sassa, N.Waki, S.Asai : id, pp.653-658
--------------------------------------------------------------------------------
58. Substitution of the Function of mold Ocillation in a Continuous Casting
of Steel by Imposition of Intermittent Alternating Magnetic Field S.Asai :
Workshop EFMP2000, Ilmenau, Germany, June 5, 2000
--------------------------------------------------------------------------------
59. Recent Activities and Prospect on Electromagnetic Processing of Materials
(EPM) in Japan S.Asai : Proceedings of 2000 EPM International Workshop on Application
Technology of EPM in Steelmaking Process, June 27, 2000, Seoul, Korea, pp.1-18
--------------------------------------------------------------------------------
60. Elimination of Inclusions in a Molten Metal by Using a High Magnetic Field
K.Sassa, N.Waki, S.Asai : Proceedings of second international conference Processing
Materials for Properties, Nov.2000, TMS, pp.565-568
--------------------------------------------------------------------------------
61. Crystal Orientation of a Thin Film Evaporated in a High Magnetic Field
M.Tahashi, K.Sassa and S.Asai: Transaction of the Materials Research Society
of Japan, Vol.25, No.1, 2000, pp.69-72
--------------------------------------------------------------------------------
62. Effect of Imposition of a High Magnetic Field on Crystal Orientation in
Deposited Films M.Tahashi, K.Sassa and S.Asai: International Symposium on New
MAGNETO-SCIENCE '00 Proceedings of the Forth Meeting, 2000, pp.281-286
--------------------------------------------------------------------------------
63. Excitation of Internal Wave and Its Propagation Characteristics in a Conductive
Liquid by Local Imposition of Electromagnetic Fields, Proccdings on Material
Processing Symposium--Muchi and szekely Memorial Symposium--, 14-15 June 2001,
Nagoya University,PP.171-174, K.Iwai and S.Asai
--------------------------------------------------------------------------------
64. Wave Generation in a Conductive Liquid by Local Imposition of Electromagnetic
Fields ,Proc. of Electromagnetic Processing of Materials in the third millennium,The
Third France- Japan Seminar (2001) pp.37-40, K.IWAI S.KAWAI Q.WANG S.ASAI
--------------------------------------------------------------------------------
65. Recent Activities on Electromagnetic Processing of Materials in Japan Proc.
of Electromagnetic Processing of Materials in the third millennium, The Third
France- Japan Seminar (2001) pp.1-6, S.ASAI
--------------------------------------------------------------------------------
66. The use of a high static magnetic field in electromagnetic processing of
materials in Japan, International Seminar on Electromagnetic Control of Liquid
Processes, Coventry University(UK), June 27-29,2001 S.ASAI
--------------------------------------------------------------------------------
67. Removal of SiC Inclusions in Molten Aluminium Using a 12T Static Magnetic
Field, Proceedings of the International Seminar on Heating by Internal Sources,
Padua, September 12-14,2001, S.Asai, F.Colli, M.Fabbn, F.Negrini and K.Sassa
--------------------------------------------------------------------------------
68. Recent Activities and Prospect on Electromagnetic Processing of Materials
in Japan, The Fourth Pacific Rim International Conference on Advanced Materials
and Processing (PRICM4), Dec. 2001, S.pp.273-276, S.Asai
--------------------------------------------------------------------------------
69. Control of Crystal Orientation in a Vaper-Deposition Process by Imposition
of a High Magnetic Field, The Fourth Pacific Rim International Conference on
Advanced Materials and Processing (PRICM4), Dec. 2001, pp.297-303, M.Tahashi,
K.Sassa and S.Asai
--------------------------------------------------------------------------------
70. Strengthening of Carbon Fibers in a Production Process with Imposition
of a High Magnetic Field, The Fourth Pacific Rim International Conference on
Advanced Materials and Processing (PRICM4), Dec. 2001, pp301-303, Mun-Gyu Sung,
K.Sassa and S.Asai
--------------------------------------------------------------------------------
71. Elimination of Inclusions in Molten Metal Using a High Magnetic Field,
The Fourth Pacific Rim International Conference on Advanced Materials and Processing
(PRICM4), Dec. 2001, pp, 305-308, Min-Keun Seo, N.Waki, Y.Chino, K.Sassa and
S.Asai
--------------------------------------------------------------------------------
72. Electromgnetic Excitation of Compression Waves in a Liquid Metal and Its
Industrial Application, The Fourth Pacific Rim International Conference on
Advanced Materials and Processing (PRICM4), Dec. 2001, pp.329-332, K.Iwai,
S.Kawai, Q.Wang and S.Asai
--------------------------------------------------------------------------------
73. Effect of a High Magnetic Field on Carbonization Reactions of Pitch, Symposium
on New Magneto-Science 2001, Proceedings of the 5th Meeting, Nov. 7~9, Tsukuba,
Japan, T.Torii, K.Sassa and S.Asai
--------------------------------------------------------------------------------
74. Excitation of Internal Wave and Its Propagation Characteristics in a Conductive
Liquid by Local Imposition of Electromagnetic Fields, 5th Pacific Rim International
Conference on Modeling of Casting & Solidification Processes, January 20-23,
2002, Nagoya University Nagoya, JapanK.Iwai and S.Asai
--------------------------------------------------------------------------------
75. Excitation of Internal Wave and Its Propagation Characteristics in a Conductive
Liquid by Local Imposition of Electromagnetic Fields, 5th Pacific Rim International
Conference on MODELING OF CASTING & SOLIDIFICATION PROCESSES,Jan.20-23,2002,Nagoya,Japan,
K.Iwai and S.Asai
--------------------------------------------------------------------------------
76. Stirring of Liquid Steel and Its Effect on Steelmaking Reaction, Japan-Australia
Symposium, April 4,5,2002, M.Iguchi, S.Taniguchi, S.Asai and M.Sano
--------------------------------------------------------------------------------
77. Supersonic Wave Generation in a Conductive Liquid by Local Imposition of
Alternating Electromagnetic Force, International Journal of Cast Metals, Vol.15(2002)4,
pp.471-473,K.Iwai, S.Kawai, Q.Wang and S.Asai
--------------------------------------------------------------------------------
78. Crystal Orientation of Deposited Films in Laser and Resistive Heating Methods
Under a High Magentic Field, Transaction of the Materials Research Society
of Japan, Vol.27, No.1, 2002, pp.31-34, M.Tahashi, M.Ishihara, K.Sassa and
S.Asai
--------------------------------------------------------------------------------
79. The Effect of a High Magnetic Field on Surface Aspect of Vapor-Deposited
Films of Non-Magnetic Materials, International Symposium on Innovative Materials
Processing by Controlling Chemical Reaction Field (IMP2002), 2002, pp.241-244,
M.Tahashi, M.Ishihara, K.Sassa and S.Asai
--------------------------------------------------------------------------------
80. Recent Activities on Electromagnetic Processing of Materials in Nagoya
University, Proceedings of the International Science Colloquium, Modelling
for Electromagnetic Processing, Hannover, March 24-26,2003, pp.21-26
--------------------------------------------------------------------------------
81. Crystallite Orientation Control of Hydroxyapatite by High Magnetic Field
Process, IUMRS-ICAM 2003,
--------------------------------------------------------------------------------
Oct. 8-13, 2003, Abstracts2, p.203, Y.Murakami, T.Marukawa, K.Inoue, K.Sassa
and S.Asai 82. Challenging of EPM in Economic Mass Production, Nano-Technology
and Environment Protection, 4th International Conference on Electromagnetic
Processing of Materials, Oct. 14-17, 2003, pp. ,S.Asai
--------------------------------------------------------------------------------
83. Crystal Orientation of Non-Magnetic Materials by Imposition of a High Magnetic
Field, 4th International Conference on Electromagnetic Processing of Materials,
Oct. 14-17, 2003, pp. ,S.Asai, K.Sassa and M.Tahashi
--------------------------------------------------------------------------------
84. Control of Crystal Orientation of Hydroxyapatite by Imposition of a High
Magnetic Field, 4th International Conference on Electromagnetic Processing
of Materials, Oct. 14-17, 2003, pp. , K.Inoue, T.Marukawa, K.Sassa, Y.Yokogawa,
Y.Sakka, M.Okido and S.Asai
--------------------------------------------------------------------------------
85. Strengthening of Carbon Fibers by Imposition of a High Magnetic Field,
4th International Conference on Electromagnetic Processing of Materials, Oct.
14-17, 2003, pp. , M.G.Sung, Y.Kawabata, K.Sassa and S.Asai
--------------------------------------------------------------------------------
86.Chemical reactivity change by imposing a high magnetic field in the manufacturing
process of carbon fibers, Symposium on New Magneto-science 2003, Proceedings
of the 7th Meeting, Nov.5-7, Tsukuba, Japan, pp.18-20, Y.Kawabata, M.G.Sung,
K.Sassa, K.Iwai, H.Ogawa, S.Asai
--------------------------------------------------------------------------------
87. A novel textured Si3N4 ceramics obtained by slip casting in a high magnetic
field, Symposium on New Magneto-science 2003, Proceedings of the 7th Meeting,
Nov.5-7, Tsukuba, Japan, pp.21-27, S.Q.Li, K.Sassa, K.Iwai, S.Asai
--------------------------------------------------------------------------------
88. Effect of Locally Imposed Electromagnetic Vibration on Solidified Eutectic
Alloy, Symposium on New Magneto-science 2003, Proceedings of the 7th Meeting,
Nov.5-7, Tsukuba, Japan, pp.28-31
--------------------------------------------------------------------------------
89. Crystal Orientation of Hydroxyapatite by Imposition of a High Magnetic
Field, Symposium on New Magneto-science 2003, Proceedings of the 7th Meeting,
Nov.5-7, Tsukuba, Japan, pp.81-85